Powered by a B&S Vanguard 16hp it is powerful and has an increased capacity because of its 11 litre fuel tank.
Its new 88cm cutting deck offers better performance and appearance due to a finer cut.
Swing or fix tip blades. With a larger cutting width of 88 cm, the Attila 88 reduces the time required to carry out the job.
Can be used on slopes up to 30%.
Cutting height adjusted by centralised lever with 7 work positions from 50 mm to 110 mm + 1 transport position.
Electric start, central cutting height adjustment, rack and pinion steering – the Etesia Attila 88 brushcutter could not be easier to operate. The hydro-mechanical transmission increases the flexibility and the ease of driving.
Its low centre of gravity, plus heavy-tread tyres and differential lock provides the attila 88 good grip on uneven ground, especially on slopes and increased safety in adverse conditions. Can be used on slopes up to 30%.
One of the positive aspects of this machine is its small size. It is also very easy to operate in orchards or vineyards.
Attila 88 has been designed with operator safety in mind. It is fitted with a parking brake and a mechanical blade clutch, operator presence safety switches and front and side mud-flap protection. And last but not least the machine is equipped with front brakes which make it possible to slow the machine down on slopes.
Welded tubular chassis for extra strength and long life.
The hydro-mechanical transmission on the Etesia Attila 88 improves long life. It combines the robustness of a mechanical drive to the flexibility of a hydrostatic transmission.